LAN Manager/DLC Configuration
8 - 1
8 - LAN Manager/DLC Configuration
The EZWebCon configuration software is the easiest way to configure the EPS. This chapter
explains DLC configuration for Windows NT 4.x hosts. Windows 95 does not support DLC
printing (see Chapter 4, TCP/IP Configuration, for more information).
NOTE: The Server needs an IP address before you can use EZWebCon. See
the Setting the IP Address section on page 4-2 for instructions.
NOTE: Printing using an LPD client is the preferred method for sending print
jobs to the EPS. To print using the TCP/IP protocol see the Using the
Command Line Interface section on page 4-8.
8.1 DLC Configuration
8.1.1 Server Configuration
To use the DLC protocol, you must have one service with the DLC characteristic enabled. Use the
Define Service servicename DLC Enabled command. The DLC characteristic may be associated
with only one service on a given EPS.
8.1.2 Host Configuration
To send print jobs from a Windows NT host to the EPS, add the EPS as a Windows NT printer.