LAT Configuration
6 - 1
6 - LAT Configuration
The EZWebCon configuration software is the easiest way to configure the EPS. The following
sections cover print configuration methods for LAT hosts.
NOTE: The Server needs an IP address before you can use EZWebCon. See
the Setting the IP Address section on page 4-2 for instructions.
NOTE: To use LAT you must obtain a LAT license from your dealer or Lantronix
and use the Set/Define Protocol LAT License command on your EPS.
LAT print queues can be created by printing to a port or printing to a service. Printing directly to a
port requires no EPS configuration.
NOTE: Printing directly to a port is the easiest method for printing to the
EPS. If you would like instructions for printing to a service, see the
Print Server Reference Manual on the CD-ROM.