4: Configuration Using Web Manager sequence).
Connect Mode: Active Connection Active Connect Select None (default) to disable Active Connect. Otherwise,
indicate the connection type from the drop-down list:
With Any Character: Attempts to connect when any
character is received from the serial port.
With Active Mdm Ctrl In: Accepts external
connection requests only when the Modem Control
In input is asserted.
With Start Character: Attempts to connect when it
receives a specific start character from the serial
port. The default start character is carriage return.
Manual Connection: Attempts to connect when
directed by a command string received from the
serial port.
Auto Start: Automatically connects to the remote IP
address and port after booting up.
Start Character If Active Connect is set to With Start Character, enter the start
character in this field. The default setting is 0D.
Modem Mode Indicates the on-screen response type when in Modem Mode
(if Modem Mode is enabled). The default setting is None.
Show IP Address After
Ring
Indicates whether to display the remote IP address upon
connection. The default setting is Yes.
Endpoint Configuration Local Port Enter the local port number.
Auto increment for active
connect
Select to auto-increment the local port number for new
outgoing connections. The range of auto-incremented port
numbers is 50,000 to 59,999 and loops back to the beginning
when the maximum range is reached. Disabled by default.
Remote Port Enter the remote port number.
Remote Host Enter the IP address of the re mote device.
Common Options Telnet Com Port Cntrl Available for configuration only when Active Connect is set to
None. Select Enable to permit Telnet communication to the
UDS unit. The Telnet Com Port Cntrl feature is used in
conjunction with the Com Port Redirector (CPR) utility. (See
the CPR online Help for details.)
Connect Response A single character is transmitted to the serial port when there
is a change in connection state. Default setting is None.
Terminal Name Available for configuration only when Telnet Com Port Cntrl
is set to Enable.
Use the terminal name for the Telnet terminal type. Enter only
UDS2100 User Guide 32