10: Monitor Mode Table 10-1. Monitor Mode Commands 
Command  Command Name  Function VS x.x.x.x  Version  Queries software header record (16 bytes) of unit with 
IP address x.x.x.x. 
GC x.x.x.x  Get Configuration  Gets configuration of unit with IP address x.x.x.x as hex 
records (120 bytes). 
SC x.x.x.x  Send Configuration  Sets configuration of unit with IP address x.x.x.x from 
hex records. 
PI x.x.x.x  Ping  Pings unit with IP address x.x.x.x to check device 
status. 
AT  ARP Table  Shows the unit’s ARP table entries. 
TT TCP Connection 
Table 
Shows all incoming and outgoing TCP connections. 
NC  Network Connection  Shows the unit’s current IP address, gateway, subnet 
mask, and DNS server. 
RS  Reset  Resets the unit’s power. 
QU  Quit  Exits diagnostics mode. 
G0, G1, ....,Ge, Gf  Get configuration 
from memory page 
Gets a memory page of configuration information from 
the device. 
S0, S1,...,Se, Sf  Set configuration to 
memory page 
Sets a memory page of configuration information on the 
device. 
GM  Get MAC address  Shows the unit's 6-byte MAC address. 
SS  Set Security record  Sets the Security record without the encryption key and 
length parameters. The entire record must still be 
written, but the encryption-specific bytes do not need to 
be provided (they can be null since they are not 
overwritten). 
SA  Scan  Initiates a wireless scan if the wireless interface is 
enabled. Reports any stations found, including BSSID, 
SSID, and RSSI. If SA is followed by a string, the string 
is used to filter SSIDs before reporting. If the BSS does 
not broadcast its SSID, only the BSSID and RSSI are 
returned. 
NS  Network Status  Reports the network interfaces’ statuses. Includes 
potentially negotiated parameters like speed/duplex for 
Ethernet or BSSID, encryption, authentication for 
wireless interfaces. 
co Set IP address, host 
bits, gateway, and 
DNS server IP  
Example:  
co 192.168.0.10 8 192.168.0.1 10001 192.168.1.10 
with  
    192.168.0.10 = IP address of the UDS  
    8 = number of host bits  
    192.168.0.1 = gateway IP address  
    10001 = port number of the UDS 
    192.168.1.10 = IP address of the DNS Server 
 UDS2100 User Guide   65