Choosethe mounting location where the unit will not interfere with the normal
drivingfunction of the driver.
Beforefinally installing the unit, connect the wiring temporarily and make sure
allconnected up properly and the unit and the system work properly.
Useonly the parts included with the unit to ensure proper installation. Theuse
unauthorizedparts can cause malfunctions.
Consultwith your nearest dealer if installation requires the drilling of holes or
modificationsof the vehicle.
Installthe unit where it does not get in the driver s wayand cannot injure the
passengerif there is a sudden stop, like an emergency stop.
Ifinstallation angle exceeds 30 from horizontal, the unit might not give its
performance.
Avoidinstalling the unit where it would be subject to high temperature, such
directsunlight, or from hot air, from the heater, or where it would be
dirtor excessive vibration.
Thisunit can be properly installed either from "Front"(conventional DIN
or"Rear"(DIN Rear-mount installation, utilizing threaded
theunit chassis). Fordetails, refer to the following
illustratedinstallation methods.
NOTES:DINFRONT/REAR-MOUNT
itis
of
other
optimum
asfrom
subjectto dust,
Front-mount)
screwholes at the sides of
'
30
Installation
5