800P TruAlign Time Recorder User Guide
Function 1 – Set Month
When prompted to set the month, use the + button to scroll forward or the - button to scroll backwards. With the desired month showing on the display, press the SET button. The ‘Set Date’ function (2) will display next.
Example: Set the month from 01 to 10
Function # | Month |
1 : 0 1
1 : 1 0
Step 1
Press the or - button until the display shows ‘10’.
Step 2
Press the SET button when the month is correct. The month will be accepted, go to the ‘Set Date’ function.
Note: If you scroll past the month you wish, continue pressing the or - button until the desired month displays, then press the SET button.
Important Note: The set up functions of the time recorder are in sequential order and you must pass through each setting to complete the programming. Simply press the SET button to accept the settings that you do not wish to change.
Your time recorder may not be programmed as you desired if you do not pass through each setting.
Page 15
