800P TruAlign Time Recorder User Guide

Appendix E - Disable Daylight Savings Correction

By default, daylight saving time is factory set for the second Sunday in March and the first Sunday in November.

If you are located in an area that does not recognize daylight saving time, you can disable the automatic correction. To disable the daylight savings correction, see the instructions below.

￿Enter the ‘Setup Mode’. See Page 13.

￿Press the SET button until you get to Function 4.

￿Press the + or - button until the display shows ‘Y’. Then press the SET button to go to Function 5.

￿Press the + or - button until the display shows ‘00’. Then press the SET button to go to Function 9.

￿Press the SET button through Function 9, 10, 11, 12, 13, 14 and 15.

￿The time recorder will go to the normal time/date display with the daylight savings correction disabled.

Page 35

Page 34
Image 34
Lathem 800P manual Appendix E Disable Daylight Savings Correction