Lathem 800P manual Quick Easy Setup Table Top Mount, Time=U.S. Eastern Time Daylight Savings=On

800P TruAlign Time Recorder User Guide

Quick Easy Setup (Table Top Mount)

To setup your 800P, follow these next steps:

Step 1

Separate the back-plate from the 800P by removing the Philips head screw. Retain the Philips head screw for later.

Step 3

Secure the back-plate to the 800P with the Philips head screw being careful not to pinch the AC cord.

Make sure the bottom of the timecard shelf is over the edge of the back- plate before securing the screw. Place the 800P on a solid flat surface. You are ready to begin using the 800P.

Note: The time, date and other settings are factory-set. See “Factory Settings” to the right. If these settings are acceptable you are ready to begin, otherwise see Page 11 “Programming the 800P”.

Step 2

Plug the AC adapter into the 800P and then plug the wall adapter into the AC outlet.

Factory Settings

￿Time=U.S. Eastern Time

￿Daylight Savings=On

￿Spring Daylight Savings=Second Sunday in March

￿Fall Daylight Savings=First Sunday in November

￿Displayed Time Format=AM/PM hours & Minutes

￿Printed Time Format=AM/PM hours & Minutes

￿Day of Week Language=English

￿Confirmation Beep=Disabled

Page 9