800P TruAlign Time Recorder User Guide
Appendix A - Changing the Print Intensity
How to change the print intensity on the timecard
If the imprint on the timecard is getting faint you may wish to increase the print intensity setting from the factory setting of 5. See the instructions below.
Enter the ‘Setup Mode’. See Page 13.
Press the SET button until you get to Function 13
Use the + button to scroll through and set the desired print intensity level.
Press the SET button through Function 14 and 15.
The time recorder will go to the normal time/date display with the changes to the print intensity applied.
Example: Set the print intensity from 5 to 7
Function #
Print Intensity
13:5
13:7
Step 1
Press the or - button until the display shows ‘7’.
Step 2
Press the SET button when the setting is correct. The setting will be accepted, continue pressing the SET button through Function 14 and 15.
The time recorder will go to the normal time/date display with the changes to the print intensity applied.
Note: If you scroll past the setting you wish, continue pressing the or - button until the desired setting displays, then press the SET button.
Page 29
