Leica ICC50 HD Leica ICC50 HD: Overview

Leica ICC50 HD Manual 12

Leica ICC50 HD: Overview

1. Black Multipurpose button: Press for

1 second – page through illumination

settings. Press for 5 seconds – change

mode between HD mode and PC Mode

2. Red Multipurpose button (only active in HD

mode):

ϘPress for one second to capture image onto

SD Card.

ϘPress for 5 seconds to set white balance

(wait for beep).

ϘPress for 10 seconds to reset camera to

factory settings (wait for second beep).

1 3

2

4

3. LED status indicator:

ϘGreen means power is on and ready for

image capture.

ϘRed means power is on but not ready for

image capture (ie: no SD card, SD card full,

Software not launched when in PC mode)

ϘYellow means initializing. Orange means

camera failure (restart or call for service).

4. SD card Slot: Accepts SD card for stand-

alone image capture.

Contents

Main Contents General Instructions Safety concept Symbols used Safety regulations Safety regulations (continued) Page Introduction The basics The basics (cont.) Leica ICC50 HD: Overview Leica ICC50 HD: Overview (cont.) Unpacking Page Preparation for Use Page Page Connection and Operation for Imaging using a Computer Limitations in PC Mode Using an Additional HDMI Monitor in PC Mode Capturing Images without a computer Using High Denition Video without a computer Setting a new white balance for the ICC50 HD Page Optional remote control Viewing images and movies with the optional remote control 007/0109 ICC500007.MP4 Calling up the Camera Menu EXPOSURE RESOLUTION SETUP CAMERA (Camera Settings) SETUP USER (User-dened Settings) Predened Illumination Scenarios Page Page Page Care and Cleaning Page Leica ICC50 HD camera module Leica ICC50 HD camera module (cont.)