Leica MPS 60, L2, S6 Please also observe the note on p, Interpupillary distance can be, Exit pupil

Preconditions for • Pay great attention when setting up your stereomicro- working comfortably scope. You will only benefit fully from the outstanding optical and ergonomic advantages of the instrument if

you set it up precisely in accordance with the directions already given.

•Arrange your workplace as well as possible, and pay attention to the heights of chair and table.

•When sitting, use the entire seat area and also the back support of the chair.

•Support your forearms.

•During work breaks, stand up and move around for exercise.

Please also observe the note on p. 5.

Ergonomic viewing The achromatic ErgoLenses for Leica S4E and the S6 models ensure an ergonomic, fatigue-free head position. The 0.6x – 0.75x ErgoLens with variable working distance of 77 – 137 mm and the 0.7x – 1x ErgoLens with variable working distance of 48 mm – 98 mm permit fine adjust- ment of magnification, working distance, as well as viewing height without time-consuming lens changes.

Leica S6 with 60° viewing angle offers optimal comfort at the tilted stereomicroscope.

Interpupillary	The interpupillary distance can be		12 / 22
distance and	adjusted from 55–75mm.
exit pupil	The exit pupil is the distance
	between the eye and eyepiece.
	It is
	–	12mm on the 10⋅/23,
		16⋅/16 and 20⋅/12 low eyepoint
		eyepieces
	–	22mm on the 10⋅/23,
		16⋅/15B, 25⋅/9.5B and 40⋅/6B
		high eyepoint eyepieces for	75
		spectacle wearers	55
	￿ Carefully put your eyes against
		the eyepieces and push the
		eyepiece tubes together or
		apart until with both eyes you
		can see a single shadow-
		free circular field.

Leica StereoZoom User Manual – Operating 23