Mains voltage Make sure that the instrument is set for the correct mains voltage. Incorrect setting can damage the instrument.

Connections Only devices with the correct power rating may be connected to the transformers. Overloading can result in damage to the instrument.

Changing lamps • Disconnect the mains cable from the mains supply before changing lamps.

Never put your hand in the lamp housing or transmitted- light stand when the instrument is connected to the mains.

Wait for filament lamps to cool down before changing. Touching hot filament lamps can result in burns.

Statutory regulations Observe all statutory accident prevention and environmental protection requirements.

Disposal National laws and regulations must be observed for the dispo- sal of these products.

EC declaration Electrically operated accessories for Leica S4 E, S6 E, S6, S6 T, of conformity S6 D and S8 APO stereomicroscopes are manufactured using state-of-the-art technology and carry an EC

declaration of conformity.

6

Leica StereoZoom User Manual – Safety instructions

Page 6
Image 6
Leica S6 D, L2, S8 APO, S6 T, MPS 30, S6 E, MPS 60 user manual