Replacing Consumables 133

7Close the top cover securely.

Replacing the Backup Battery

When the backup battery is at its end of life, the printer's date and time cannot
be retained. Follow the procedure described below to replace the backup bat-
tery.
Note
Only use the coin-shaped 3V lithium battery CR2032. It’s very important
to protect the printer controller board and any associated circuit boards
from electrostatic damage. Before performing this procedure, review
the antistatic caution on page 219. In addition, always handle circuit
boards by the edges only.
1Turn off the printer and discon-
nect the power cord and inter-
face cables.