Configuration Menu Overview 71
HOLD
JOB
TIME
OUT
Settings DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY
SAVER
TIME
Settings 5 minutes/6 minutes/7 minutes/8
minutes/9 minutes/10 minutes/11
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/1
hour
Specify the length of time until the machine enters Energy
Saver mode.
MENU
TIME
OUT
Settings OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If OFF is selected, no
timeout occurs.
LCD
CON-
TRAST
Settings -3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is -3 and the brightest level setting is
+3.
SECU-
RITY
CHANGE
PASS-
WORD
Specify the password for locking the control panel.
If the password is set to 0000 (default), the control
panel is not locked. In order to lock the control panel,
be sure to specify a password other than 0000.
LOCK
PANEL
Settings OFF/MINIMUM/ON
Specify how the control panel is locked.
If OFF is selected, the control panel is not locked.
If MINIMUM is selected, the INTERFACE MENU
and SYS DEFAULT MENU are protected with a
password.
If ON is selected, all menus are protected with a
password.
In order to lock the control panel, be sure to specify a
password other than 0000.