Maintenance Schedule

Annually (Before the onset of the Burning Season)

Maintenance Task

 

Accomplishing Person

 

 

 

Procedure

 

 

 

 

 

 

 

Inspecting/Cleaning Burner, Logs

 

Qualified Service Technician

Inspect valve and ensure it is properly operat-

and Controls

 

 

 

 

ing. Check piping for leaks. Vacuum the

 

 

 

 

 

 

control compartment, fireplace logs and burner

 

 

 

 

 

 

area.

 

 

 

 

 

 

 

Check Flame Patterns and Flame Height

 

Qualified Service Technician

Refer to Figures 6 (EDV3530), 7 (EDV4035)

 

 

 

 

 

 

or 8 (EDV4540) on page 7 and verify the

 

 

 

 

 

 

flame pattern and height displayed by the

 

 

 

 

 

 

appliance conforms to the picture. Flames

 

 

 

 

 

 

must not impinge on the logs.

 

 

 

 

 

 

 

Inspecting/Cleaning Pilot and Burner

 

Qualified Service Technician

Refer toFigure9(SIT)orFigure10(Honeywell)

 

 

 

 

 

 

on page 8. Remove any surface build-up on

 

 

 

 

 

 

pilotandburnerassembly. Wipethepilotnozzles,

 

 

 

 

 

 

ignitor/flame rod and hood. Ensure the pilot

 

 

 

 

 

 

flame engulfs the flame sensor as shown.

 

 

 

 

 

 

 

Checking Vent System

 

Qualified Service Technician

Inspect the vent system at the top and at the

 

 

 

 

 

 

base (within the firebox) for signs of blockage

 

 

 

 

 

 

or obstruction. Look for any signs of disloca-

 

 

 

 

 

 

tion of the vent components.

 

 

 

 

 

 

 

Appliance Checkout

 

Qualified Service Technician

Perform the appropriate appliance checkout

 

 

 

 

 

 

procedure detailed in this manual.

 

 

 

 

 

 

 

Replacing Rockwool Ember Materials

 

Homeowner/Qualified Services Technician

Remove old ember materials and vacuum the

 

 

 

 

 

 

rockwool placement area. Place new rockwool

 

 

 

 

 

 

as described in this document.

 

 

 

 

 

 

 

 

 

Periodically (After the Burning Season)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Maintenance Task

 

Accomplishing Person

 

 

Procedure

 

 

 

 

 

 

 

 

 

Cleaning Firebox Interior

 

Homeowner

 

Carefully remove logs, rockwool and decora-

 

 

 

 

 

 

 

tive volcanic stone and vermiculite. Vacuum

 

 

 

 

 

 

 

out interior of the firebox. Clean firebox walls

 

 

 

 

 

 

 

and log grate. Replace logs, Rockwool and

 

 

 

 

 

 

 

volcanic stone as detailed in this manual.

 

 

 

 

 

 

 

 

 

Check Flame Patterns and Flame Height

 

Homeowner

 

Refer to Refer to Figures 6 (EDV3530), 7

 

 

(EDV4035) or 8 (EDV4540) on page 7 and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

verify the flame pattern and height displayed

 

 

 

 

 

 

 

by the appliance conforms to the picture.

 

 

 

 

 

 

 

Flames must not impinge on the logs.

 

 

 

 

 

 

 

 

 

Checking Vent System

 

Homeowner

 

Inspect the vent system at the top and at the

 

 

 

 

 

 

 

base (within the firebox) for signs of block-

 

 

 

 

 

 

 

age or obstruction. Look for any signs of

 

 

 

 

 

 

 

dislocation of the vent components.

 

 

 

 

 

 

 

 

 

Cleaning Front Glass Enclosure Panel

 

Homeowner

 

Clean as necessary following the directions

 

 

 

 

 

 

 

provided in this manual. DO NOT TOUCH OR

 

 

 

 

 

 

 

ATTEMPT TO CLEAN GLASS WHILE HOT.

 

 

 

 

 

 

 

 

 

6