| Burner |
| ||
| Venturi |
| ||
|
| Tube |
| |
Air Shutter |
| |||
Opening |
| |||
|
| Decrease | Air | |
Increase |
| Shutter | ||
| Air Shutter | |||
Air Shutter | Door | |||
Opening | ||||
Opening |
|
| ||
|
|
| ||
Orifice
Air Shutter
Adjusting
Arm
MAIN BURNERFACTORY SHUTTER OPENING SETTINGModels | Natural Gas | Propane Gas | |
inches (mm) | inches (mm) | ||
| |||
|
|
| |
EDV3530 |
| 3/8 (9.5) | |
|
|
| |
EDV4035 | 1/8 (3.2) | 3/8 (9.5) | |
|
|
| |
EDV4540 |
| 3/8 (9.5) | |
|
|
|
Figure 5
Log PlacementWARNING: LOGS GET VERY HOT AND WILL REMAIN HOT UP TO ONE HOUR AFTER GAS SUPPLY IS TURNED OFF. HANDLE ONLY WHEN LOGS ARE COOL. TURN OFF ALL ELECTRICITY TO THE APPLIANCE BEFORE YOU INSTALL GRATE AND LOGS.
WARNING: THIS APPLIANCE IS NOT MEANT TO BURN WOOD. ANY ATTEMPT TO DO SO COULD CAUSE IRREPARABLE DAMAGE TO YOUR APPLIANCE AND PROVE HAZARDOUS TO YOUR SAFETY.
WARNING: THE SIZE AND POSITION OF THE LOG SET WAS ENGINEERED TO GIVE YOUR APPLIANCE A SAFE, RELIABLE AND ATTRACTIVE FLAME PAT- TERN. ANY ATTEMPT TO USE A DIFFERENT LOG SET IN THE FIREPLACE WILL VOID THE WARRANTY AND WILL RESULT IN INCOMPLETE COMBUSTION, SOOTING, AND POOR FLAME QUALITY.
8
Carefully position the ceramic fiber logs and twigs over the burner as shown in Figures 6 (EDV3530), 7 (EDV4035) or 8 (EDV4540) on this page. Refer to the detailed log placement instructions provided in the LOG PLACEMENT GUIDE accompanying this document.
Proper twig placement is critical to prevent sooting. Twigs should be placed in the gaps between the flame peaks and should be positioned so that at no time they impinge the flames.
Figure 6 | EDV3530 |
|
|
Figure 7 | EDV4035 |
|
|
Figure 8 | EDV4540 |
|
|
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. |
|