Glowing Embers (Rockwool) Placement

Refer to the detailed glowing embers placement instructions provided in the LOG PLACEMENT GUIDE accompanying this document.

Ceramic Panel Placement

Refer to the detailed ceramic panel placement instructions provided in the LOG PLACEMENT GUIDE accompanying this document.

Millivolt Appliance Checkout

The pilot flame should be steady, not lifting or floating. Flame should be blue in color with traces of orange at the outer edge.

The top ³⁄₈" (10 mm) at the pilot generator (ther- mopile) and the top ¹⁄₈" min (tip) of the quick drop out thermocouple should be engulfed in the pilot flame. The flame should project 1" (25 mm) beyond the hood at all three ports. See Figure 9. To light the burner, refer to the lighting instructions on pages 11 and 12.

MILLIVOLT

Hood

Ignitor Rod

Thermocouple

 

 

³⁄₈" Min (9 mm)

Pilot Nozzels

Thermopile

Figure 9

Electronic Appliance Checkout

To light the burner, refer to the lighting instructions on page13and14. Ensure the ignitor lights the pilot. The pilot flame should engulf the flame sensor as shown in Figure 10.

ELECTRONIC

 

Proper Flame

3/8 To 1/2 Inch

Adjustment

(9 mm to 13 mm)

ACCESSORY COMPONENTS

Remote Control System (Standard) H0249

RCL

Standard Remote Control System

The Model RCL (Standard) Remote Control System, features a simple On/Off control function for the fireplace. This model includes a hand-held transmitter, a remote receiver with wall-mount coverplate and all hardware required to install the unit. The remote receiver can be wall or hearth mounted.

Flame Modulating Remote Control

 

 

– Natural Gas

H0301

RCL-MN

Flame Modulating Remote Control

 

 

– LP/Propane Gas

H0302

RCL-ML

Flame Modulating Remote Control

Flame Modulating Remote Controls were developed to provide a safe, reliable and user- friendly remote control system for appliances equipped with a Millivolt Gas Valve. A

Remote Control System (Deluxe)

H0251

RCL-T

Deluxe Remote Control System

The Model RCL-T (Deluxe) Remote Control System has all of the features of the standard system along with an added easy to read LCD screen which presents access to many en- hancements, including; battery power level in- dicator, timer, mode of operation, thermostatic display including room temperature in either metric of English units, flame indicator and clock. Fully programmable, the Model RCL-T allows for command over nearly all operational and temperature variables, using the hand held remote control transmitter.

The kits attach to the glass enclosure panel without the use of hardware. The decorative arch kits can not be used in conjunction with the screen panel kit.

Arch Door Kits

Pilot

Nozzle

Ground Electrode

Flame Rod

Hot Surface

Igniter

detailed set of instructions are included with each remote.

 

Catalog No.

Model No.

Model No.

Polished

Brushed

 

 

Brass

Stainless

EDV3530

81L34

98L68

ADK35CPB

ADK35CBS

 

EDV4035

81L35

98L69

ADK40CPB

ADK40CBS

 

Figure 10

With proper care and maintenance, your appliance will provide many years of enjoyment. If you should experience any problem, first refer to the trouble shooting guide in this manual. If problem persists, contact your Lennox distributor.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

EDV4540

81L36

98L70

ADK45CPB

ADK45CBS

 

9