28 Inter-Tel® INT3000 User Guide
PLACING CALLS ON HOLD
You can place calls on hold in one of two ways: individual or system.
Individual Hold places the call on hold at one endpoint. It can then be directly
picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see page26).
System Hold places the call on hold in the system. You can then pick up the call
at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold.
NOTE: You cannot place intercom calls on system hold.
To place a call on Individual Hold:
1. Press . The line number will flash.
2. Press to hang up or place another call.
To place an outside call on System Hold:
1. Press and dial .
2. Press to hang up or place another call.
To return to a call that is on hold:
Press or the flashing button.
MUTING THE MICROPHONE
To mute the microphone so that you can hear the other party but they cannot
hear you (this does not put them on hold):
Press . Your endpoint will remain muted until you press again, even if
you hang up or place another call. While the microphone is muted the TALK icon in
the display flashes.
hold
talk
s
p
cl
3 3 5
talk
hold
mute mute