35

GETTING STARTED
Inter-Tel® INT3000 User Guide
STATION-TO-STATION MESSAGES

Leaving Messages

If you call an endpoint that is busy, does not answer, or is in do-not-disturb, you can
use the station-to-station messaging feature to let the other person know you called.
To signal that a message is waiting, a called endpoint’s MSG button flashes and the
display shows the number of waiting messages.

If You Do Not Have a MSG Button

To leave a message:
1. If you call an endpoint that is busy, does not answer, or is in do-not-disturb, and
want to leave a message, hang up.
2. Then dial and dial the desired extension number.
To cancel a message that you left at another endpoint:
1. Dial .
2. Dial the extension number of the endpoint where you left the message.

If You Have a MSG Button

If you have a MSG button, there are two messaging options:
Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your endpoint.
Leave a message with the called party's message center. When the party you
called responds to the message indication, a call is automatically placed to his or
her message center instead of your endpoint. Sometimes the Voice Mail system is
programmed as the message center.
To leave a message while on an intercom call:
1. After calling the extension where you want to leave the message, press your
MSG button.
2. Press to hang up or wait for the message center to answer.
To cancel a message that you left at another endpoint:
1. Dial .
2. Dial the extension number of the endpoint where you left the message.
3 6 7
3 6 6
talk
3 6 6