59
MOVING ON
Inter-Tel® INT3000 User Guide
To program a user-programmable function button as a Station Speed-Dial but-
ton:
1. Dial .
2. Press the feature button you want to change into a Station Speed-Dial button.
3. Dial (default Station Speed Dial feature code).
4. Dial a digit 0-9 when the display asks for a number. This is the station speed-dial
number “location.”
NOTE: Station Speed-Dial buttons created using this procedure are not the same
as the SYS SPD feature button found on some endpoints.
To erase a station speed-dial name and/or number:
1. Dial .
2. Dial the location code (0-9) to be erased.
3. To remove the name: Press BACKSPACE repeatedly until the name is erased.
4. Press to continue.
5. To remove the number: Press BACKSPACE repeatedly until the number is
erased.
6. Press to exit.
NOTE: To erase a station-dial name and/or number, you must pre-program the
Backspace button (feature code 314) on your endpoint. Refer to page62, Program-
ming Your Feature Buttons section for details on how to program the backspace
button.
To dial a Station Speed-Dial number:
1. Select an outgoing line by pressing .
2. Dial and then the desired station speed-dial location number (0-9).
System Speed Dialing
Your system administrator can store up to 1000 speed-dial numbers in System Speed-
Dial locations 000-999.
To view and/or dial system speed-dial numbers:
1. Dial
2. Dial the location code (000-999) for the desired number. The number appears.
3. Press to dial the number.
397
3
8
2
3
8
3
#
#
call 1-4
3
8
2
3
8
1
#