To cold boot the PB42
1Disconnect the PB42 from power source if externally powered.
2Remove the batteries from the PB42.
3Insert the batteries back into the PB42.
4Reconnect external power if powered externally.
Cleaning the Printer
To properly maintain your PB42, you should clean it at the recommended intervals.
To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer.
Use only cleaning agents specified next. Intermec is not responsible for damage caused by any other cleaning materials used on this printer. Clean the printer with a cotton swab saturated with alcohol.
Tear bar
Paper
sensorPrinthead
Platen roller
PB42 Portable Receipt Printer: Identifying the parts of the PB42 to clean regularly.
PB42 Portable Receipt Printer User’s Guide | 35 |
