3..Your phone will find the Jabra SP5050..
Your phone then asks if you want to pair with it.. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the pass- key or PIN = 0000 (4 zeros).. Your phone will confirm when pair ing is complete..
4. In case of unsuccessful pairing, repeat steps 1 to 3.
You can manually put your Jabra SP5050 into pairing mode, if you want to pair with a new phone:
1.Make sure the Speakerphone is off..
2.Press and hold the answer/end button for approx 7 sec.. until the connection status indicator light starts blink continuously..
3.Set your Bluetooth phone to discover your Speakerphone like described above
5 How to…
Answer a call
•Tap the answer/end button
End a call
•Tap the answer/end button
Make a call
•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your Speakerphone.. If your phone does not allow this feature, press on the Jabra SP5050’s answer/end button to transfer the call to the Speakerphone..
Reject a call*
•Press the answer/end button when the phone rings to reject an
incoming call.. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal..
Activate voice dialling*
•Press the answer/end button.. For best results, record the voice- dialling tag through your Speakerphone.. Please consult your phone’s user manual for more information about using this feature..
Jabra JX10 Bluetooth headset | * Phone dependent |
