IMPORTANT SAFETY AND WARNING INFORMATION

FOR YOUR SAFETY do not install or operate your Vin- tage™ gas stove without first reading and understanding this manual. Any installation or operation of the appli- ance deviating from that which is stated in this manual WILL void the warranty and may be hazardous.

INSTALLATION AND REPAIR SHOULD ONLY BE DONE BY A QUALIFIED SERVICE TECHNICIAN. DO NOT ATTEMPT TO SERVICE THE APPLIANCE YOURSELF.

The stove should be inspected and cleaned before use and at least annually by a qualified service technician. More frequent cleaning may be required due to exces- sive lint from bedding material, carpeting, etc.

It is imperative that control compartments, burners and circulating air passageways of the room heater be kept clean.

Adequate clearances around the combustion chamber and accessibility clearances for servicing and proper operation must be maintained.

Turn off the gas before servicing this appliance. It is recommended that a qualified service technician per- form an appliance check-up at the beginning of each heating season.

All installations must conform with all local, state and national codes. In the absence of local codes, the installation must conform with National Fuel Gas Code ANSI Z223.1-latest edition, also known as NFPA 54 (In Canada, the current CAN/CSA B149.1 installation code). Refer to the National Fuel Gas Code and local zoning and code authorities for details on installation requirements. Your Vintage gas stove must be vented to the outside in accordance with the latest edition of the National Fuel Gas Code.

This gas stove MUST be vented directly to the outside and MUST NEVER be attached to a chimney serving a separate solid fuel burning appliance. Each gas appli- ance MUST USE a separate vent system. Common vent systems are PROHIBITED.

Mobile home installations must conform with the Mobile Home Construction and Safety Standard, Title 24 CFR, Part 3280 (in Canada CAN/CSA Z240 MH), or, when such a standard is not applicable, the Standard for Mobile Home Installations, ANSI A225.1 - latest edition.

The appliance, when installed, must be electrically grounded in accordance with local codes or in the ab- sence of local codes, with the National Electrical Code, ANSI/NFPA 70 - latest edition. In Canada, the current CSA C22-1 Canadian Electrical Code - latest edition.

Do not make any make-shift compromises during in- stallation. Any modification or alteration may result in damage to the appliance or dwelling and will void the warranty, certification and listings of this unit.

Failure to use manufacturer provided parts, variations in techniques and construction materials or practices other than those described in this manual may create a fire hazard and void the limited warranty.

Your Lennox Hearth Products gas stove must be equipped for the proper fuel type and altitude at which it will be operated. Any operation outside the parameters outlined in this manual may result in a hazardous condition and will void the warranty. Please carefully read the sec- tions pertaining to these subjects and/or be sure your appliance is properly equipped.

Do not use this stove if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

Due to high temperatures, the stove should be located out of traffic areas and away from furniture and draper- ies.

Children and adults should be alerted to the hazards of high surface temperature and should stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the Lennox gas stove. Clothing or any other flammable material should not be placed on or near the stove.

Never use solid fuels such as wood, paper, cardboard, coal, or any flammable liquids, etc., in this appli- ance.

Any grill, panel, or glass removed for service MUST be replaced prior to operating the stove. Do not operate appliance with the glass front removed, cracked or broken. Replacement of the glass should be done by a qualified service technician.

DO NOT USE abrasive cleaner on the glass door as- sembly. DO NOT ATTEMPT to clean the glass door when it is hot.

Lennox Hearth Products, its employees, or any of its representatives assume no responsibility for any dam- ages caused by an inoperable, inadequate, or unsafe condition as a result of any improper operation, service or installation procedures, whether direct or indirect.

INSTALLER: THESE INSTRUCTIONS ARE TO REMAIN WITH THE HOME OWNER!

Page 1 Page 3
Page 2
Image 2
Lennox Hearth VIN operation manual Important Safety and Warning Information
Page 1 Page 3

VIN specifications

Lennox Hearth is renowned for its cutting-edge heating solutions, specifically their versatile VIN (Vent-Free Indoor Natural Gas) fireplaces. These fireplaces are designed to provide warmth and comfort while enhancing the aesthetic appeal of any living space. With an emphasis on efficiency, style, and safety, Lennox Hearth's VIN products offer an array of features and technologies that cater to diverse customer needs.

One of the standout features of Lennox VIN fireplaces is their vent-free design. This technology allows for easy installation and flexibility in placement, as there is no need for external venting systems. Homeowners can enjoy the cozy ambience of a fireplace in virtually any room without the hassle of structural modifications often required for traditional fireplaces. The design also maximizes heat efficiency by utilizing all of the fuel to produce warmth, eliminating heat loss associated with venting.

The VIN fireplaces are equipped with advanced heating technologies, including the use of innovative ceramic burners. These burners deliver a realistic flame effect while effectively heating the room. Lennox Hearth has incorporated a system that allows for variable heat output, allowing users to adjust the intensity of warmth according to their preferences and the size of the space.

In terms of safety, Lennox takes pride in integrating user-friendly features. The VIN models come equipped with oxygen depletion sensors, which automatically shut off the unit if oxygen levels drop to unsafe levels, ensuring peace of mind for users. Additionally, the fireplaces are designed with high-quality, durable materials that enhance their longevity, making them a worthwhile investment for homeowners.

Aesthetically, Lennox VIN fireplaces are available in a variety of styles, finishes, and sizes. This versatility allows customers to select models that complement their home décor, whether they prefer a modern, sleek look or a more traditional design. Optional decorative fronts and logs further allow for personalization, ensuring each fireplace can serve as a focal point in the room.

In conclusion, Lennox Hearth VIN fireplaces combine innovative technology, safety features, and elegant design to provide an unparalleled indoor heating experience. With the ability to enjoy the warmth and ambiance of a fireplace without the constraints of venting, these units stand out as a practical and stylish solution for today’s modern homes. Whether for cozy family gatherings or quiet evenings, Lennox Hearth VIN fireplaces promise comfort and style for every household.
Top Page Image Contents