PRE-INSTALLATION
Features
Installation Options
Residential
Vented vertical and horizontal
Manufactured (mobile) home
Natural gas (NG) or propane (LP)
Bedrooms
Optional
Venting
This stove can be vented with Security™ Secure Vent™ pipe*. Coaxial pipe diameters are
When planning your installation, select the correct length of vent pipe for your particular requirements. Determine the minimum clearance to combustibles from the rear of the unit to the wall. It is also important to note the thickness of the wall. Before cutting the vent hole through the wall make sure that ALL vent and termination clearances (see Page 15) will be met.
Electrical
The standard fan motor requires 120 Volts AC for operation. The stove is not dependent on the fan or an outside electrical supply to operate.
WARNING - Electrical Grounding Instructions - This appliance is equipped with a
* Other approved chimney brand is Simpson
Millivolt Valve
This stove is operated with a millivolt valve and therefore burns even during a power outage.
Fuel
This stove comes from the factory equipped to burn natural gas at a specified elevation. The stove can be converted to burn LP gas (liquid propane) by changing the cassette (valve and pilot assembly) or installing a conversion kit. Only Lennox Hearth Products conversion kits can be used to convert from NG to LP or LP to NG. Contact your Lennox Hearth Products dealer for details.
Specifications
Stove weight: 150 lbs
Pipe:Type -
Recommended manufacturer*
Security™ Secure Vent™*
Diameter -
Stove Packaging List
The Vintage™ gas stove comes with the following parts:
1Stove Body with Burner Cassette
1Log Set
1Bag of Ember Material
1Bag of the volcanic stone.
1Installation and Operation Manual
Optional Parts
150 CFM Blower
Reversible
Gallo Veneziano Stone Panels
Remote Controls
Digital Wall Thermostat Kit
Note: See Pages 24 and 25 for ordering information.
| RATINGS |
| Vintage™ (VIN) | |
|
|
|
| |
| NATURAL GAS |
| LP GAS | |
|
|
| ||
|
|
|
| |
Max/Min Input BTUh | 27,000 / 19,500 |
| 27,000 / 21,300 | |
|
|
|
|
|
Manifold Pressure (IN. WC) | 3.5 / 1.8 |
| 10.0 / 6.0 | |
|
|
|
| |
Min. Inlet Pressure (IN. WC) | 5.0 |
| 11.0 | |
|
|
|
| |
Maximum heat output | 22,140 |
| 22,140 | |
|
|
|
|
|
P4 Efficiency | w | 47.00% |
| 49.07% |
|
|
|
| |
Orifice (DMS) | #40/.098 IN. |
| #53/.060 IN. | |
|
|
|
|
|
uUnit factory equipped for
Electrical Rating: 120 VAC, 60 HZ, Less Than 2 Amps
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.