Chapter 4: Installing Components

Installing drives

Your server’s basic configuration includes one CD drive and one 3.5-inch diskette drive. Your server also has two additional 5.25-inch drive bays.

Your server can have up to eight SCSI hard drives in the hot-swap bay behind the front access door.

CD drive

Diskette drive

5.25-inch drive bay

5.25-inch drive bay

Hot-swap bays

As you prepare to install drives, remember:

Do not use the top 5.25-inch drive bay for drives which have electronic components exposed on the top. Drive mounting rails at the top of the bay may damage any exposed electronic components.

Before you install a drive, see the drive’s documentation for information on configuring the drive, setting drive jumpers, and attaching cables.

IDE hard drives can be configured as single, master, slave, or cable-select. IDE CD drives can be configured as master, slave, or cable-select.

34

www.gateway.com

Page 39
Image 39
Gateway 980 manual Installing drives