Gateway 980 manual Installing Components, Lift the tray away from the case

Follow the instructions in “Closing the server case” on page 32. Turn on your server.

Tighten the system board tray thumbscrew on the back of the case. Reinstall the memory, processors, voltage regulators, and fans. Connect the power and data cables.

Chapter 4: Installing Components

12 Lift the tray away from the case.

13 Insert the new system board tray into the case, then slide the tray toward the back of the case.

14

15

16

17 Reinstall the expansion cards. For more information, see “Installing PCI expansion cards” on page 47.

18

19

20 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

21 Check BIOS settings to make sure that they detect the server’s new hardware, then save your changes (if any) and close the BIOS Setup utility.

68 www.gateway.com