Gateway 980 Replacing the CMOS battery, Restore any BIOS settings that you wrote down in Step

Follow the instructions in “Closing the server case” on page 32. Turn on the server.

Remove the old battery.

Replacing the CMOS battery

7 Push the battery retention clip away from the battery until the battery lifts up. You can use a screwdriver to help lift the battery.

8

9 Make sure that the positive (+) side of the new battery is facing up, then press the new battery into the socket until it snaps into place.

10

11

12 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

13

14

Restore any BIOS settings that you wrote down in Step 3.

Save all your settings and close the BIOS Setup utility.

www.gateway.com 73