Gateway 980 manual Installing memory

Installing memory

Installing memory

When you upgrade your server memory, make sure that you install the correct type of memory module for your server. Your server uses PC2100 DDR SDRAM registered ECC DIMM memory. The following illustration shows the location of the memory modules on the system board.

Warning

Modules must be installed in identical pairs. Use only PC2100 DDR SDRAM registered ECC DIMM memory modules.

Install memory first into slots 1 and 2, then into slots 3 and 4. If you have memory installed incorrectly, your server will not start up.

DIMM slot 1

DIMM slot 2

DIMM slot 3

DIMM slot 4

www.gateway.com 45