Snorkel Terminations

For installations requiring a vertical rise on the exterior of the building, 14-inch and 36-inch tall snorkel terminations are available. When us- ing a snorkel, the stove can be vented directly out the back. There is a vent starter collar fastened to the stove (to vent straight out the back), remove the four screws securing the collar, rotate the collar 180 degrees and refasten using the same four screws. Make sure the gasket between the collar and the stove is properly positioned before refastening the collar. After rotating the collar, it will be positioned horizontally. When this pipe passes through a wall, a wall thimble - Simpson part number 942or Security™ part number SV4RSM is required. The hole in the wall for the wall thimble should be 9-1/4” wide by 10-1/4” high. To vent out the rear wall, add up to a 12” section of pipe and then the snorkel. When the stove is located in a corner of the room, to vent horizontally first add a 45 degree elbow, then up to a 12” section of pipe and lastly the snorkel. Installations using a snorkel have no restrictor installed in the pipe (see Pages 13 and 14 for restrictor positioning). Follow the same installation procedures as used for standard horizontal terminations. If the snorkel termination must be installed below grade, (i. e. basement application), proper drainage must be provided to prevent water from entering the snorkel. Do not attempt to enclose the snorkel within the wall, or any other type of enclosure. On vinyl siding, furring strips may be used to ensure that the snorkel is not recessed into the siding.

Framed Hole: 9-1/4”

Wide by 10-1/4” High

Termination Cap

Wall Thimble

Elbow

A Minimum of 18” Sec- tion of Pipe

Figure 20

Framed Hole:

9-1/4”x 10-1/4” High

Snorkel

Wall Thimble

Figure 21

Vertical Vent Installation

Important Notes

1.All vertically terminated vent installations use 6-5/8”x 4” Se- curity™ Secure Vent™ pipe*.

2.If the vent passes through a ceiling or floor, a firestop - Simpson #963 or Security™ #SV4BF - is required.

3.If the vent passes through the roof, a roof flashing - Simpson #943 or 943S or Security™ #SV4FA or SV4FB - and storm collar - Simpson #953 or Security™ #SV4FC - are required.

4.A 1-inch clearance from the vent pipe to combustible materials must be maintained.

5.A maximum of either two 45º elbows or two 90º elbows may be used. See diagrams showing allowable offsets.

6.The maximum system height is 30 feet and the minimum is 10 feet.

Vertical Termination Cap

Storm Collar

Flashing

Roof - Maintain 1”

Clearance to Combustibles

Ceiling Minimum

Framing 10”x 10”

Ceiling Firestop

Pipe Length

Figure 22

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

VIN specifications

Lennox Hearth is renowned for its cutting-edge heating solutions, specifically their versatile VIN (Vent-Free Indoor Natural Gas) fireplaces. These fireplaces are designed to provide warmth and comfort while enhancing the aesthetic appeal of any living space. With an emphasis on efficiency, style, and safety, Lennox Hearth's VIN products offer an array of features and technologies that cater to diverse customer needs.

One of the standout features of Lennox VIN fireplaces is their vent-free design. This technology allows for easy installation and flexibility in placement, as there is no need for external venting systems. Homeowners can enjoy the cozy ambience of a fireplace in virtually any room without the hassle of structural modifications often required for traditional fireplaces. The design also maximizes heat efficiency by utilizing all of the fuel to produce warmth, eliminating heat loss associated with venting.

The VIN fireplaces are equipped with advanced heating technologies, including the use of innovative ceramic burners. These burners deliver a realistic flame effect while effectively heating the room. Lennox Hearth has incorporated a system that allows for variable heat output, allowing users to adjust the intensity of warmth according to their preferences and the size of the space.

In terms of safety, Lennox takes pride in integrating user-friendly features. The VIN models come equipped with oxygen depletion sensors, which automatically shut off the unit if oxygen levels drop to unsafe levels, ensuring peace of mind for users. Additionally, the fireplaces are designed with high-quality, durable materials that enhance their longevity, making them a worthwhile investment for homeowners.

Aesthetically, Lennox VIN fireplaces are available in a variety of styles, finishes, and sizes. This versatility allows customers to select models that complement their home décor, whether they prefer a modern, sleek look or a more traditional design. Optional decorative fronts and logs further allow for personalization, ensuring each fireplace can serve as a focal point in the room.

In conclusion, Lennox Hearth VIN fireplaces combine innovative technology, safety features, and elegant design to provide an unparalleled indoor heating experience. With the ability to enjoy the warmth and ambiance of a fireplace without the constraints of venting, these units stand out as a practical and stylish solution for today’s modern homes. Whether for cozy family gatherings or quiet evenings, Lennox Hearth VIN fireplaces promise comfort and style for every household.

Lennox Hearth VIN Snorkel Terminations, Vertical Vent Installation Important Notes

Models: VIN