Lenovo E10 manual Note Applying labels to the base cover

Table 25. Removal steps of DC-in cable and base cover assembly

1

2

3

Note: Applying labels to the base cover

Note: If the Windows Authentication label (COA) 3 is attached to a part that is replaced, return the old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were.

The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:

2

3

5

SIM information label under door

Information label under door

Certified label under battery

Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

1

4

Windows license label (COA) (only for Windows 7 models)

Ethernet label

For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

For the location of each label, refer the following figure:

86ThinkPad Edge 11” and E10 Hardware Maintenance Manual