Lenovo M500 manual User Color

Item	Description	Default
User color	This feature adjusts the color balance in each color (red, green, blue, cyan,	80
	magenta, yellow and white by using color correction adjustment. Increasing a
	color’s setting heightens the intensity of that color on the screen, while a lower
	setting makes the color less intense. Press the up or down cursor button to select
	a color. Press the left or right cursor button to adjust the selected color (range: 0 -
	100).
White peaking	White Peaking increases the output in the brightest whites without changing the	Data source:
	blacks and dark grays. Higher settings may cause very bright shades of gray to	10
	saturate. For a smoother, more natural image, use lower settings. Press the left or	Video source:
	right cursor button to adjust the value of white peaking (range: 0 - 10).	2
Logo display	Press the left or right cursor button to enable or disable if the logo displays when	on
	the projector starts, and when no source is detected (range: On - Off).
Fan speed	Press the left or right cursor button to toggle between Normal and High fan	normal
	speeds.
Security lock	Press the left or right cursor button to enable or disable Security Lock.	no password
	When you enable the security lock, the Register Password dialog box appears:
	You can use the cursor buttons numbered 1, 2, 3, and 4 on the remote to enter
	the password. You can use any combination including the same number multiple
	times, but the password must be four characters. After entering the password a
	second time to confirm it, OK displays. When the password is enabled, it must
	be entered every time after you power on the projector. See “Setting access
	passwords (security lock)” on page 2-4for steps on setting the password.
Cancel	Return to previous menu.	n/a

Note: If Security Lock is enabled, you must enter the password every time the projector is turned on. However, if the projector is already turned on, Security Lock can be disabled without having to enter the current password.

User Color

1.Press the Menu button to open the OSD menu.

2.Press the left or right cursor buttons to move to the Properties menu. Press the up or down cursor buttons to move to the Advance Feature menu.

3-8M500 Projector User’s Guide