RANDOM PLAY CD OPERATION
1.Press the Random Button either in stop mode or normal play mode, the set will play
all of the songs in random order. The display will show “ RANDOM ” icon.
N O T E : If the “ RANDOM ” icon flashes and then disappears from the Display, turn off the CD power and restart.
2.Press the Forward Skip/Search ( 
)Button to skip to the next random song.
3.To resume normal play, press the Random Button again. The “ RANDOM ” icon will go off.
PROGRAMMED MEMORY PLAY
Up to 20 tracks can be programmed for disc play in the order you like. Programming can only be done during STOP mode.
PROGRAMMED (MEMORY) PLAYBACK
1. During STOP mode, press the Program Button.
2. The Display will show “ 
”, and “ PROGRAM ” and
“ TRACK ” will flash in the display.
3.Press the Skip/Search Buttons either 
or 
until the desired track shows on the Display.
4.Press the Program Button. The Display will show “ 
”. 
5.Repeat steps 3 and 4 until all the desired tracks are programmed.
6.When you finished programming, press the CD Play/Pause Button.
7. All songs will play in the order you programmed.
8.The Display will show the track number being played, and the “ PROGRAM ” will show (but not flashing) in the display during programmed play.
9.If in middle of play, you want to hear the next
programmed song, press Forward Skip/Search 
.
10.When all the songs have finished playing, the set will stop. “ PROGRAM ” disappears from the display.
11.To turn off the power, remember to press the Power Switch again, the Power/Batt. Lamp will go off.
PROGRAM TRACK 
PROGRAM TRACK 
PROGRAM TRACK 
PROGRAM
TRACK
NOTE : Programming can only be done when the CD is in the STOP mode. (CD is in the set, CD Switch is ON and Display shows the total number of tracks (songs) and the total play time of the CD.)
EXAMPLE: To program track 4 to play first.
When CD has stopped,
•Press the Program Button, “ 
” will show and “ PROGRAM ” will flash in the Display.
•Press the Forward Skip/Search Button till track 4 appears.
•The Display will show “ 
” and “ PROGRAM ” flashing.
•Press the Program Button, “ 
” will show and “ PROGRAM ” will flash.
•Press Play.
•Track 4 will play first.
N O T E : The programmed memory will be cleared if the CD power is turned off.
11 | E | |
|
