TO PLAY A CASSETTE TAPE

OK NO

FULL EMPTY REEL REEL

1.Open the Cassette Door by pressing the Cassette Stop/Eject Button (in some cases, you may have to press the Cassette Stop/Eject Button twice since this button has combined functions).

2.Insert the cassette tape, with the exposed tape facing downwards, into the tracks in the Cassette Door with the full reel on the left side, make sure the tape inside is not slack or loosely wound. If it is, insert a pencil into the reel and turn until the tape is wound up (see Page 13).

3.Close the Cassette Door.

4.Press the Power Switch, the Power/Batt. Lamp will light.

5.Press the Tape Switch, the Tape Indicator will light.

6.Press the Cassette Play Button. The cassette tape will play till it reaches the end and then stop.

N O T E : If the Cassette Play Button does not stay down,

your

tape

may have reached the end, reverse the tape

or

press

Rewind .

 

 

7.Adjust the Volume Control and Bass Boost Switch to your listening preference.

8.To stop the tape manually, press the Cassette Stop/Eject Button.

9.To remove the tape, press the Cassette Stop/Eject Button again and the Cassette Door will open.

10.To listen to the other side of the tape, remove the cassette tape, reverse it and re- insert into cassette compartment, then press the Cassette Play Button.

11.To shut the power off, press the Power Switch again, the Power/Batt. Lamp will go off.

RELAY PLAY

To play tapes in Deck A and then Deck B, follow the steps below.

1.Press the Cassette Play Button on Deck A.

2.Press the Cassette Pause Button on Deck B.

3.Press the Cassette Play Button on Deck B, Deck A will play first and when it finishes, Deck B will start playing automatically.

4.When the tape finishes playing on Deck B, the set will stop.

14

 

CD-160S050699 V.2 E

 

Page 15
Image 15
Lenoxx Electronics CD-160 manual To Play a Cassette Tape, Relay Play