Lenoxx Electronics CD-160 Introduction, Power SUPPLY- 2 WAY System, DC Operation, AC Operation

INTRODUCTION

Your new COMPACT DISC PLAYER WITH AM/FM STEREO DUAL CASSETTE RECORDER is a specially designed all solid state set which, with proper care, will give you years of trouble-free service. Please read these operating instructions carefully as they will help you obtain maximum performance from this set. Unpack the set carefully and place it on a level surface, away from sources of excessive heat, such as radiators.

POWER SUPPLY- 2 WAY SYSTEM

This set is designed to be operated from two different power sources as listed below:

A. DC OPERATION

This set runs on 8 size “D” batteries. For best performance, always use heavy duty alkaline batteries.

TO INSTALL BATTERIES

1.Remove the Battery Door by gently pushing tabs downward and outward.

2.Install 8 size “D” batteries.

NOTE : The battery compartment has 2 levels, upper and lower. Be sure to install the batteries as per the sketch shown or inside the battery compartment.

LOWER

UPPER

3.Replace the Battery Door.

N O T E : To use your set on battery power, you MUST remove the AC Power Cord from BOTH the wall outlet AND the back of the set.

N O T E : The negative polarity (side) of battery touches the spring.

BATTERY INDICATOR

The Power Lamp also shows you if your batteries are fresh. When this lamp gets dim, it is time to replace the batteries.

B. AC OPERATION

Plug the AC Power Cord into the back of the set and insert the AC plug into 120 Volts AC 60Hz 15W standard household outlet.

NOTE :	This cord is polarized. This means either
	end of the cord will only fit ONE way
	into the socket or wall outlet. If it does
	not fit, do not force it, just reverse it and
	try again.
N O T E : If the AC Power Cord is plugged into the
	back of the set, the set will not work on
	batteries. To operate the set on batteries,
	remove the AC plug from the back of the	POLARIZED AC PLUG
	set.

5 CD-160S050699 V.2 E