Mounting Installation

DIN-Rail Mounting

The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed on the industrial switch, please see the following pictures to screw the DIN-Rail on the switch. Follow the steps below to hang the industrial switch.

1.Use the screws to screw the DIN-Rail on the rear side of the industrial switch.

2.To remove the DIN-Rail, reverse the step 1.

3.After the DIN-Rail is screwed on the rear side of the switch, insert the top of DIN-Rail into the track.

14

Page 14
Image 14
LevelOne IFE-0502, IFE-0501 user manual Mounting Installation, DIN-Rail Mounting