Chapter 2 | 2 |
Installation |
This Chapter covers the physical installation of the Broadband VPN Gateway.
Requirements
•Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•TCP/IP protocol must be installed on all PCs.
•For Internet Access, an Internet Access account with an ISP, and a Broadband modem (usually, DSL or Cable modem).
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Broadband VPN Gateway.
Ensure the Broadband VPN Gateway and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
•Use standard LAN cables to connect PCs to the Switching Hub ports on the Broadband VPN Gateway. Both 10BaseT and 100BaseT connections can be used simultaneously.
•If required, you can connect any LAN port to another Hub. Any LAN port on the Broadband VPN Gateway will automatically function as an "Uplink" port when required. Just connect any LAN port to a normal port on the other hub, using a standard LAN cable.
3. Connect WAN Cable
Connect the Broadband modem to the WAN port on the Broadband VPN Gateway. Use the cable supplied with your Broadband modem. If no cable was supplied, use a standard LAN cable.
4. Power Up
•Power on the Broadband modem.
•Connect the supplied power adapter to the Broadband VPN Gateway and power up.
Use only the power adapter provided. Using a different one may cause hardware damage.
6
