Microsoft VPN
Figure 57: Modify Security Method
13.On the resulting screen (above), select High [ESP] then click "OK" to save your changes and return to the Require Security Properties screen.
0
Figure 58: Require Security Properties
14. Ensure the following settings are correct, then click "OK" to return to the Filter Action tab of the Edit Rule Properties screen.
VPN Setting | Windows Setting |
|
|
IKE enabled | Negotiate security |
|
|
AH disabled | AH Integrity: <None> |
|
|
ESP encryption: Enable/DES | ESP Confidentially: DES |
|
|
ESP authentication: Enable/MD5 | ESP Integrity: MD5 |
|
|
15.Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP address. Enter the WAN (Internet) IP address of the Broadband VPN Gateway, as shown below.
89
