APC AP9254, AP9258 Setting the Scanning Order, Turning Scanning On and Off, From the OSD menu

5.2Setting the Scanning Order

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Choose ÔÔScanning orderÕÕ from the menu.

3.Select either ÔÔSequential orderÕÕ or ÔÔAlphanumeric orderÕÕ.

4.Press Enter.

5.3Turning Scanning On and Off

From the OSD menu.

1.From the main OSD Window, press the Control key twice or type Alt-Mto access the Command Menu.

2.Select ÔÔTurn scanning ONÕÕ or ÔÔTurn scanning OFFÕÕ from the menu. This is a toggle option - only one scanning option will show on the menu at any one time.

3.Press Enter.

With the Scan Button (non-secure mode only)

1.You may initiate scanning by pressing and holding the Scan push- button until the SCAN LED lights up.

2.Scanning may be halted if a channel is selected or if the Scan push- button is pressed again.

23