Pairing Connections | APC AP9254, AP9258 specs

10.Power down the slave APC KVM Switch unit and disconnect the keyboard and monitor.

11.Repeat Steps 2-7 with the remaining master Switch unit.

12.Now, choose option 2, ÔÔPaired(Master)ÕÕ for this unit. Press Enter to save the selection, then press Esc repeatedly to exit the OSD menu.

13.Power down the master unit and disconnect the monitor.

Pairing Connections

1.Locate the pairing cable kit. It will contain a Y-video cable with two 15-pin male VGA connectors and one 15-pin female VGA con- nector. It also contains a 9-pin male serial cable.

2.Plug a male VGA connector into the port labeled ÒVIDEOÓ on each of the APC KVM Switch units.

MADEINUSAMADEINUSA

PATENTPENDING PATENTPENDING

!

!

3.Connect the female VGA cable to the end of your monitor cable.

4.Next, connect the serial cable between the ports labeled ÒPAIRINGÓ on the APC KVM Switch units.

!

!

5. Connect a PS/2 mouse to the master APC KVM Switch unit.

29

Image 33

APC AP9254, AP9258 manual Pairing Connections

Contents

KVM Switch Canadian Department of Communications Statement FCC Statement Table of Contents Page Expansion for up to 64 computers Product Overview Feature Overview Push-button and keyboard switching Compatibility Connecting your Peripherals Installation Basic Installation Connecting Computers to the APC KVM Switch Rack Mount Installation Attaching Multiple APC KVM Switch Units Advanced Installation Basic Operations Overview ESC Keyboard Control Key Sequence Action Keyboard Switching Action System Control and Maintenance OSD Operations Activating OSD OSD Window APC KVM Switch Command Menu Basic Channel Maintenance Adding New Channels base unit onlyAdding New Channels with a cascaded unit Changing Channel Names and Addresses Deleting an Existing Channel Operation Procedure ID WindowChanging the Size, Colour and Position of the ID Window Setting the ID Window Dwell Time Administrator Password Administrator FunctionsMultiple User Logins Differences between Secure and Non-secure Operating Modes Creating the Administrator Password Setting the Administrator Logout TimePush-Button and Hot-Key Channel Selection Setting up additional users Channel Scanning Choosing a scan method With the Scan Button non-secure mode only Setting the Scanning OrderTurning Scanning On and Off From the OSD menu Setting the Scanning Dwell Time For Sequential ScanningFor Alphanumeric Scanning Scanning and Security Specifications Initial Configurations Pairing Select Unit Configuration Tiered Default Paired Master Pairing Connections User Adding New Channels with Paired Units Uninstalling Pairing Symptom Action Troubleshooting Symptom Action Symptom Action Symptom Action Symptom Action If Problems Persist Limited Warranty W. a p c c . c o m