APC AP9254, AP9258 manual Advanced Installation, Attaching Multiple APC KVM Switch Units

2.3 Advanced Installation

Attaching Multiple APC KVM Switch Units

1.Follow steps 1-6 of the Basic Installation section.

2.Plug the 25-pin ÒDÓ connector of your input cable into any avail- able channel port on the rear of your base switch unit.

3.Plug the 15-pin video connector on the other end of the cable into

the port labeled on your first cascading KVM switch unit. Plug the PS/2 mouse connector, designated by a mouse icon, into the port. Plug the remaining 6-pin miniDIN keyboard connector into

the port.

PS/2 MOUSE	D
CONNECTOR	H
	C
	D
	G
B	H
F	C
A	G
B
E
USER
F

MADEINUSAMADEINUSA

CASCADING

UNIT

BASE UNIT

VGA VIDEO CONNECTOR

		!
PENDINGPATENT	-240V	Hz
		50/60
		, .1A,
	100	!
PENDINGPATENT	100	Hz
		50/60
		, .1A,
	-240V

PAIRING 1

0 PAIRING 1

0

E

USER

PS/2 KEYBOARD

CONNECTOR

4.Repeat steps 2-3 for every cascaded switch unit in your system.

5.Power-up your switch unit(s) first, then all attached computers.

7