APC AP9254, AP9258 manual Connecting Computers to the APC KVM Switch

Connecting Computers to the APC KVM Switch

4.Locate your first input cable. It will have a 25-pin ÒDÓ connector at one end. Plug this cable into any numbered channel port on the rear of the switch. The other end of the input cable will have three con- nectors: a 15-pin ÒHDDÓ connector for your video, a PS/2 keyboard connection and a PS/2 mouse connection. The PS/2 connectors are designated by a mouse or keyboard icon on the connector. Plug these connectors into the matching ports on your computer.

MOUSE PORT

KEYBOARD

PORT

VIDEO

PORT

100-
240V~,.1a,		50/80Hz
T	VAC	POWER
2A, 250
		PATENT	PENDING

USER

H

G

F

E

D

C

MADE IN USA

B

A

5.Locate your next input cable. Repeat step 4 until all computers are properly attached to the switch.

6.Locate the power cord that came with your APC KVM Switch unit. Plug it into the IEC power connector on the switch. Make sure that the power switch is off, then plug the other end of the power cord into an APC UPS or appropriate AC wall outlet. This outlet must be near the equipment and easily accessible, to allow for unplugging prior to any servicing of the unit.

5