CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time.

 

Satellite Box or

UT

Cable Box (not supplied)

 

N

 

From Cable System

 

or Satellite Dish

 

75-ohm

 

Coaxial Cable

 

(not supplied)

ANT

 

 

[Fig.7]

TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL

1.Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record from your Cable Converter Box or Satellite Box.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or video camera), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the

CHANNEL or button

AUX

until "AUX" appears on the

 

screen.

 

- 11 -

EN

8E21

Page 11
Image 11
Sylvania 3819LC Installing the Batteries, External Input Mode, Cable with CONVERTER/ Descrambler BOX or Satellite BOX