SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area. You must use the remote control for the this procedure.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE
FIRST TIME
1Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
2Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
3Select "ENGLISH" or "ESPAÑOL"
Select | "ENGLISH" | or | – SET UP – | |
| ||||
"ESPAÑOL"=Spanish using the | B LANGUAGE | |||
[ENGLISH] ESPAÑOL | ||||
F.FWD/B or REW/s button. | AUTO PRESET | |||
"[ ]" indicate the selected lan- |
| |||
guage. |
|
|
| |
|
|
| ||
4 Begin auto preset |
| – SET UP – | ||
Press the PLAY/▲ or STOP/▼ | LANGUAGE | |||
[ENGLISH] ESPAÑOL | ||||
|
|
| ||
button to point to "AUTO |
| B AUTO PRESET | ||
PRESET". |
|
|
| |
DELETING (OR ADDING)
CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
1Select "CHANNEL SET UP"
Press the MENU button. | – M E N U – |
TIMER PROGRAMMING | |
Press the PLAY/▲ or STOP/▼ | PICTURE CONTROL |
B CHANNEL SET UP | |
| SETTING CLOCK |
button to point to "CHANNEL | USER’S SET UP |
CAPTION [OFF] | |
| LANGUAGE [ENGLISH] |
SET UP". | ZERO RETURN |
TIME SEARCH | |
Then, press the F.FWD/B button. |
|
2Select "ADD/DELETE CH"
Press the PLAY/▲ or STOP/▼ | – CHANNEL SET UP – |
button to point to "ADD/ | B ADD / DELETE CH (TV) |
DELETE CH". | AUTO PRESET |
Press the F.FWD/B button. |
|
3Enter the desired channel number
Press the PLAY/▲ or STOP/▼ button until your desired channel
Then press the F.FWD/B button.
number appears. (You can also
08
The tuner scans and memorizes all active channels in your area.
NOTES:
●The TV/VCR distinguishes between standard TV channels and cable channels.
●If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button. To preset the tuner again, see "CHANNEL SET UP AGAIN" on page 13.
5After scanning
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.
use the number buttons or the ADD/DELETE CHANNEL ▲/▼ button to enter
it) (Example: CH8)
4Delete (or add) it from (into) memory
Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory.
●To delete another channel, repeat steps [3] and [4].
●If you press the F.FWD/B or REW/s button again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5Exit the channel setup mode
Press the MENU button to returns to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL ▲ or ▼ button.
- 12 - | EN |
