
PREPARATION FOR USE
ANTENNA/CABLE | VHF/UHF SEPARATE ANTENNAS |
CONNECTIONS | In some areas it will be necessary to use an outdoor antenna. |
|
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is detach- able. Insert the stem of the antenna into the hole on the
Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/VCR as shown in the diagram below.
For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)
NOTE :
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
Bent pin
Cable | Plug |
|
(Needs to be straightened) | (Straight pin) | |
| Rod Antenna | VHF/UHF Antenna |
|
| |
| (Not supplied) |
|
| T |
|
|
| [Fig.4] |
NOTE: |
|
|
The connection of an indoor antenna may not always give acceptable TV reception.
VHF Antenna |
|
UHF Antenna | |
VHF/UHF |
|
Combiner |
|
(Not |
|
supplied) |
|
ANT |
|
Flat | [Fig.5] |
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box.
By using this connection you can:
1)Use the TV/VCR remote to select channels
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same
channel. |
From Cable System |
Coaxial Cable |
(not supplied) |
ANT |
ANT |
[Fig.6] |
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article
Antenna/Cable Connections Continued on the Next Page.
- 10 - | EN |