RECORDING
Make sure ...
●TV/VCR power must be turned on.
●Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
NORMAL RECORDING
You can ONLY watch the same TV program that is being recorded.
1 Select the channel to be | CH 10 |
recorded |
|
Press the number buttons on the remote control or the CHANNEL ▼ or ▲ button.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2Select the tape speed
Press the SPEED button to select the desired tape speed (SP/LP/ SLP).
SP
3Begin recording
REC
Press the RECORD button.
SP
4Stop recording
Press the STOP button when recording is completed.
SKIPPING UNWANTED
SCENES DURING RECORDING
Press the PAUSE/STILL button PAUSE | |
to temporarily stop recording. |
|
Press the PAUSE/STILL or |
|
RECORD button to resume |
|
recording. | SP |
NOTES: |
|
●After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.
●If "CLOSED CAPTION (ON)" is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.
- 22 - | EN |
7L26
