TRENDnet TW100-BRV324 manual VPN Examples, Example 1 Connecting 2 Broadband VPN Gateways, Setting

Broadband VPN Gateway User Guide

VPN Examples

This section describes some examples of using the Broadband VPN Gateway in common VPN situations.

Example 1: Connecting 2 Broadband VPN Gateways

In this example, 2 LANs are connected via VPN.

Figure 48: Connecting 2 Broadband VPN Gateways

Note

•The LANs MUST use different IP address ranges.

•Both endpoints have fixed WAN (Internet) IP addresses.

Configuration Settings

Setting	LAN A Gate-	LAN B Gate-	Notes
	way	way
Name	Policy 1	Policy 1	Name does not affect
			operation. Select a mea-
			ningful name.
Remote Endpoint	205.17.11.43	202.11.13.211	Other endpoint's WAN
			(Internet) IP address.
Local	Any	Any	Use a more restrictive
IP addresses			definition if possible.
Remote	192.168.1.1 to	192.168.0.1 to	Address range on other
IP addresses	192.168.1.254	192.168.0.254	endpoint.
			Use a more restrictive
			definition if possible.
Key Exchange	IKE	IKE	Must match
IKE SA Parameters
IKE Direction	Both ways	Both ways	Does not have to match.
			Either endpoint can block
			1 direction.
Local Identity	IP address	IP address	IP address is the most
			common ID method
Remote Identity	IP address	IP address	IP address is the most
			common ID method
IKE Authentication	Pre-shared Key	Pre-shared Key	Certificates are not widely
method			used.
Pre-shared Key	Xxxxxxxxxx	Xxxxxxxxxx	Must match

82