Broadband VPN Gateway User Guide
Figure 32: Static Routing Screen
Data - Static Routing Screen
RIP
RIP Version | Select the desired option from the |
|
|
Static Routing |
|
Static Routing | This list shows all entries in the Routing Table. |
Table Entries | • The "Properties" area shows details of the selected item in the |
| list. |
| • Change any the properties as required, then click the "Update |
| Route" button to save the changes to the selected entry. |
|
|
Properties | • Destination Network - The network address of the remote LAN |
| segment. For standard class "C" LANs, the network address is |
| the first 3 fields of the Destination IP Address. The 4th (last) |
| field can be left at 0. |
| • Subnet Mask - The Subnet Mask for the remote LAN segment. |
| For class "C" networks, the default mask is 255.255.255.0 |
| • Gateway IP Address - The IP Address of the Gateway or |
| Router which the Broadband VPN Gateway must use to com- |
| municate with the destination above. (NOT the router attached to |
| the remote segment.) |
| • Port - Normally, this will be "LAN". If NAT is disabled, the |
| "WAN" option can be used for Routers which are accessed via |
| the WAN port. |
| • Metric - The number of "hops" (routers) to pass through to |
| reach the remote LAN segment. The shortest path will be used. |
| The default value is 1. |
|
|
50
