Microsoft VPN
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specifying the Source and Destination addresses for the "Filter Properties". Instead, for both IP Filters, the Filter Properties- Addressing should be completed as follows.
Figure 77: Windows 2000 Server - Addressing
•The Source Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the address range used on the Broadband VPN Gateway's LAN.
•The Destination Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the address range used on the Windows 2000 LAN.
99
