N_One Wireless Broadband Router
Station name | This is the same as the "Device Name" for the Wireless Broad- |
| band Router. |
|
|
SSID | This is also called the "Network Name". |
| • If using an ESS (Extended Service Set, with multiple access |
| points) this ID is called an ESSID (Extended Service Set |
| Identifier). |
| • To communicate, all Wireless stations should use the same |
| SSID/ESSID. |
Options |
|
Mode | Select the desired mode: |
| • Off - Disable Wireless AP function. |
| • 802.11b - Only 802.11b connections are available. 802.11g |
| Wireless Stations will only be able to use the Wireless |
| Broadband Router if they are fully |
| the 802.11b standard. |
| • 802.11b + g - Both 802.11.g and 802.11b Wireless stations |
| will be able to use the Wireless Broadband Router. |
| • 802.11b + g + n - 802.11g, 802.11b and 802.11n Draft |
| Wireless stations will be able to use the Wireless Broadband |
| Router. |
| • 802.11 g + n - Both 802.11.g and 802.11n Draft Wireless |
| stations will be able to use the Wireless Broadband Router. |
| • 802.11n - Only 802.11n Draft Wireless stations can use the |
| Wireless Broadband Router. |
Channel No. | Select the Channel you wish to use on your Wireless LAN. |
| • If you experience interference (shown by lost connections |
| and/or slow data transfers) you may need to experiment with |
| different channels. |
| • If using multiple Access Points, adjacent Access Points |
| should use different Channels to reduce interference. |
|
|
Broadcast | If enabled, the Wireless Broadband Router will broadcast its |
SSID | SSID. This allows PCs and other wireless stations to detect this |
| Access Point and use the correct SSID. The default SSID is |
|
|
| If disabled, PC users will have to manually enter the SSID and |
| other details of the wireless interface before they can connect to |
| this Access Point. |
|
|
Wireless Security
Current Setting | The current Wireless security is displayed. The default value is |
| Disabled. |
|
|
Configure | Click this button to access the Wireless security |
Button | view or change the settings. See the following section for details. |
21