LevelOne WBR-6000 MAC Filter, Set Stations, Button, Draft 802.11n Setting, Bandwidth, Protected

N_One Wireless Broadband Router

MAC Filter

MAC Filter	There are 3 options:
	• Disabled - Select this if you don't want to use Wireless MAC
	Filter function.
	• Allow - Only the client Listed in the Station can connect to
	this Wireless Router .To edit the wireless stations Please
	click the "Set Stations".
	• Deny - The client listed on the stations can not use the
	access point, others can use this access point to access the
	internet or LAN.
Set Stations	Click this button to manage the MAC Address control stations.
Button
Draft 802.11n Setting
Bandwidth	Select the desired bandwidth from the drop-down list.
	20MHz Only – Single Channel Bandwidth
	40MHz Only – Dual-Channel Bandwidth; combine channels
	result with high performance.
	20MHz/40MHz Auto – Auto Selection, this is the default setting.
	Wireless Broadband Router will auto selection depend on the
	bandwidth demand.
	Please note that selecting 20MHz Only or 40MHz Only might
	cause connection problem due to unmatched setting with client
	devices. Auto Selection is highly recommended.
Protected	Select On or Off for protected mode. When Protected Mode is
Mode	ON, 802.11n Draft transmission will be treated as first priority.

22